Raspberry Piのセットアップから【Python環境のインストール】まで

~% diskutil list

/dev/disk0 (internal, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
...

/dev/disk1 (synthesized):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
...

/dev/disk2 (external, physical):
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *31.9 GB    disk2
   1:             Windows_FAT_32 boot                    268.4 MB   disk2s1
   2:                      Linux                         31.6 GB    disk2s2

~% diskutil eraseDisk FAT32 RPI /dev/disk2

~% brew cask install raspberry-pi-imager

~$ wpa_passphrase {ssid} {password}

network={
    ssid="{ssid}"
    #psk="{password}"
    psk={psk}
}

~$ sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
country=JP

+ network={
+     ssid="{ssid}"
+     scan_ssid=1
+     psk={psk}
+ }

^O
^X

~$ sudo reboot

~% netstat -rn

Routing tables

Internet:
Destination        Gateway            Flags        Netif Expire
default            {default gateway}  UGSc         en0
...

~% cat /etc/resolv.conf

nameserver {primary dns}
nameserver {secondary dns}

~$ sudo nano /etc/dhcpcd.conf

# fallback to static profile on eth0
#interface eth0
#fallback static_eth0

+ interface wlan0
+ static ip_address={ip address}/24
+ static routers={default gateway}
+ static domain_name_servers={primary dns}
+ static domain_search=

^O
^X

~$ sudo reboot

~$ sudo touch /boot/ssh

~$ sudo nano .bashrc

# some more ls aliases
#alias ll='ls -l'
#alias la='ls -A'
#alias l='ls -CF'
+ alias ll="ls -la"

~$ echo -e 'if [ -f ~/.bashrc ]; then\n  . ~/.bashrc\nfi' >> ~/.bash_profile

~$ sudo reboot

~% ssh-keygen -R {ip address}
~% ssh-keygen -R raspberrypi.local

~% ssh pi@{ip address}

~% ssh pi@raspberrypi.local

~$ sudo apt-get update
~$ sudo apt-get upgrade
~$ sudo apt-get install tightvncserver

~$ tightvncserver

~$ sudo apt update
~$ sudo apt upgrade
~$ sudo apt install -y git openssl libssl-dev libbz2-dev libreadline-dev libsqlite3-dev libffi-dev

~$ git clone https://github.com/pyenv/pyenv.git ~/.pyenv
~$ echo 'export PYENV_ROOT="$HOME/.pyenv"' >> ~/.bash_profile
~$ echo 'export PATH="$PYENV_ROOT/bin:$PATH"' >> ~/.bash_profile
~$ echo -e 'if command -v pyenv 1>/dev/null 2>&1; then\n  eval "$(pyenv init -)"\nfi' >> ~/.bash_profile
~$ source ~/.bash_profile

~$ pyenv install -l

~$ pyenv install {version}

~$ pyenv global {version}

~$ sudo apt-get install vsftpd
~$ sudo systemctl enable vsftpd
~$ sudo systemctl start vsftpd
~$ sudo systemctl status vsftpd

~$ sudo cp /etc/vsftpd.conf /etc/vsftpd.conf.org
~$ sudo nano /etc/vsftpd.conf

# Uncomment this to enable any form of FTP write command.
- #write_enable=YES
+ write_enable=YES

# Default umask for local users is 077. You may wish to change this to 022,
# if your users expect that (022 is used by most other ftpd's)
- #local_umask=022
+ local_umask=022

# ASCII mangling is a horrible feature of the protocol.
- #ascii_upload_enable=YES
- #ascii_download_enable=YES
+ ascii_upload_enable=YES
+ ascii_download_enable=YES

^O
^X

~$ sudo systemctl restart vsftpd
~$ sudo systemctl status vsftpd